3D Bullet problem?

Questions about Video Copilot products

3D Bullet problem?

Postby Director on 08/10/2008, 1:49 pm

When I goto edit the silver part of the bullet how come I cannot edit it without affecting the texture shape of the bronze part ?
twitter.com/videography
Director
 
Posts: 380
Joined: 08/1/2008, 6:25 pm

Re: 3D Bullet problem?

Postby Conotor on 08/10/2008, 2:43 pm

If you have linked the inner bullet/silver with the outer bullet/bronze then if you affect one it will affect the other.
Conotor
 
Posts: 73
Joined: 08/2/2008, 7:03 pm

Re: 3D Bullet problem?

Postby Director on 08/10/2008, 7:37 pm

Conotor wrote:If you have linked the inner bullet/silver with the outer bullet/bronze then if you affect one it will affect the other.


Well they move separately, but when UWV map or w/e is applied the textures move together. :? The casing isn't affected at all by the way.
twitter.com/videography
Director
 
Posts: 380
Joined: 08/1/2008, 6:25 pm

Re: 3D Bullet problem?

Postby dataflow on 08/10/2008, 8:24 pm

what 3d app are you using?

each will have different methods
dataflow
 
Posts: 159
Joined: 08/7/2008, 8:07 pm
Location: australia

Re: 3D Bullet problem?

Postby Director on 08/11/2008, 12:51 pm

dataflow wrote:what 3d app are you using?

each will have different methods


Sorry, it's 3DS Max.
twitter.com/videography
Director
 
Posts: 380
Joined: 08/1/2008, 6:25 pm

Re: 3D Bullet problem?

Postby dataflow on 08/11/2008, 6:35 pm

i would say you did something wrong.
each part of the bullet is separate so changing 1 part shouldnt effect the other (i would start again)
dataflow
 
Posts: 159
Joined: 08/7/2008, 8:07 pm
Location: australia


Return to VC Product Support