these tutorials r inprooving our skills. i am thank full to u .

tutorials are awesome.........
thanks andrew ............

Have been looking for one of those for a very long time..Thanks

No more project files?

will you teach me how to use dvd studio pro, because im using final cut pro and the video will be final output using the compressor. but then the dvd studio pro it is the only software that compatible with compressor. so how's that, help me. epolizm@yahoo.com

Thank you very much Andrew I came to know about the DVD authoring which was very exciting for me. I learn so many things from you but this is the 1st comment from my side. I love the way you teach its amazing and Thank you very much again for such a great stuff of tutorials.

hello Andrew!

Very Interesting tutorials.Keep posting...


Thanks.

hi u,r god of vfx .because good will help all .

I think u r god of after effect.I hope u will never close down this website.Thanks

Sir thankyou so much for ur help i got so many things in this thanks alot.

How does one make it so people cant skip a timeline, just out of interest, as to how they make the copyright warnings UNSKIPABLE. I want to annoy people too :P

You are the best video co pilot please stay around forever you are much needed and appriciated

Thanks for the tutorial Andrew!
I appreciate you putting so much effort into you work! I'll be buying some of your DVDs this Christmas!!! :)

I would like to see the oposite too. I mean " when you push a button how you can leave the main menu the same way as the begining"? I've seen it happend in a lot of expencive productions dvd's.
Any way all af your tutorials are great and helped me a lot with my bussines. I'm intenting to bye all of your stuff cause you convinced me. I say that it's not expencive according the capabilities of it.
Thank you

man you are awesome x7000000000

how do you know all this :):):):):):):):):):):):)
I have bought one of your dvd's because you have learned so much thank you so much for all the help :):):):):):):):):):):):):):):):):)

Hey, saludos de PERÚ, llegue aqui por un enlace externo en un foro sobre encore y debo decir que tus videos son excelentes, pero este en especial me ayudo mucho, voy a ver si cuelgo el video que hice gracias a tu ayuda. Sigue asi y gracias.
.
.
.
Hey greetings from PERÚ, many thanks dude you are so awesome, i´m checking your videos, so see you later

andrew, dude you simply rock!
thanks for the great tut, my life is getting more simple everyday with your help.

cheers man!

Thanks mate. Great tutorial.
It helped me a lot!

Wow...you are good at teaching....next time you come to florida , unlimited drinks on me.....

Hi to everyone!!

I've a problem with mpeg2-DVD... an error says: "Could not load any writer. Adobe Media Encoder will now exit."

How I can do it???
Please help me!!

Ciao from Italy

yea man you are great andrew

good

I'm doing a download for both the beautiful lessons I wish you could be in the DVD was new to the length of

Very good! Congratulations from Egypt

Thank you!! was already working the same way, except i didn't know that you can also make buttons in AE for the menu..

sweet!

I love this, but the vide on my burned DVD is jittery and jumpy. Ive tried for 3 days (50 DVD burns) and can not sort this out at all. Tried all combination of field orders, tried burning from different hard drives, burning to folder instead of discs etc... nothing works?! I'm desperate for someone to help with this...

How do you get the target icon inside the 'O' in RecOn Man title?

-Ben

WOW! I love this tutorial - how do you get your movie onto the title? And how do you create another menu inside the BONUS FEATURES icon?

Muito bom o trabalho de voces. me ajudaram muito.

i'm froom indonesia bali work at broadcast AVB u are amazing guy i lern a lot from you tq bro keep going

Man you just dont know how many pepole around the world you just helped!!! freaken sweet!!!

Haven't seen it yet... i love it already !

Nice nice but you know do it better

Maybe if the button was interactive with other action in video after do the click.

all the tutorial are amazing but this one is some simple.

Thank you and god bless you

I LOVE YPU ANDRO

fantastic work dude!!

oh hey i got an idea, maybe, just maybe, you can make a tutorial of a person running and everyone else is frozen. so basically he's superman. if you have the time then i would appreciate it, if not then thats ok :)

Muito massa esses tutoriais

This is impressive work. Thanks for the tutorial.

Just giving you two thumbs up for your work.
Simply impressive!

Thanks YOUR THE MAN!

Error: When i try to export to MPEG2-DVD, an error says: "Could not load any writer. Adobe Media Encoder will now exit."..and then it says: "After Effects error: Writer Initialization Error!".. I dunno what's wrong. pls. help!

Do you need AE cs4? or you can do it just with cs3?

I was just thinking that instead of highlights for the buttons since it can look messy (I understand it's for tutorial purposes) you could get the text tool and use the same font as the button and kind of do a highlight with that with bigger font slightly. Although if you did it this way it wouldn't be a drag and drop sort of thing, you would have to create a button for each selection you have. Other than that, this tutorial was the most helpful tutorial I have ever watched in my entire life. I've always wanted to do this kind of stuff.

Thanks a ton Andrew, you do amazing work and you're a good teacher.

Great job! Way to show me Encore, I have it and now I know how to use it. I usually was just using DVD Studio, but couldn't make 16x9 dvd menu's, but now I can, thanks.

Great tutorial!

Only problem is when I went to view it on my TV (actually on 2 televisions) it looked a little distorted and fuzzy.

Wonder why?

Again: A great Tutorial!

I just want to ad: For those of you who have Dynamic Link (it only comes with the bundles), you don´t have to render the aae project!
You easily can add it in Encore (or open a new one there).
And: You can add buttons directly in aae!!!

Chears,

All the best!

Greetings from Vienna!


Jakob

Ha ha, way to go Sam!! It's good to see him kicking butt! Thanks for the tutorial Andrew, =)

i think its rude andrew kramer doesnt reply to all of us.....lol....jk

Kramer you are a legend. You totally saved my media project with this one.

Thanks for all your great products and tutorials.

Jeshua

I've been looking for a tutorial like this for a long time! Thanks!

Nice Fighting and Authoring . . . . . . .

I buy the serious fx training dvd and then you put this up for free -_-

I love it. It's cool!

Very awesome tutorial.
I was curious if Adobe Dynamic Link could be used to achieve some of the same results? Or is it not really necessary?

good idea thank u my best pro...

Thank you from Ukraine )
You are GREAT! )

Andrew! You are great! I don't speak English well, but we, in Russia, love you!)) Thanks for tutorials! We sit with dictionaries to teach your great lessons! it that costs!)))

Good, it is kind of the same tutorial that was in
the DVD serious FX training.

Hey Andrew!


Can you start making tutorials with Adobe After Effects CS4???
Because i only have CS4 version, and any projects of 3d text you have in your tutorias doesn't work correct with my aee cs4.

Thanks! And very nice tutorials!

thnks!

great work cramer, i m so thankful 2 u becz i m learning so much things from u God Bless u. Ur way of presentation is great

SO GOOD THX

Hey Andrew. Great tutorial. One question though...

What exactly is the point of starting out with NTSC D1 Widescreen Square Pixel, if you're only going to convert it into NTSC DV Widescreen? Why not just start out in NTSC DV Widescreen and save any troubles you could run into?

I'm asking this because I personally don't know much about conversions of aspect ratios. So maybe an explanation as to why you do it that one would help me out. Thanks.

I just found your tutorials and let me say the're awesome¡¡¡
all the basics for after effects.. all in one :D
thanks so much for this... and of course in some time i will go for the advanced :D ... in some time of course

thanks from Peru ;)

Hi, Great tutorial.

Just wondering, is there any need to export as MPEG2 from Premiere CS4, when you Dynamic Link it directly into Encore? I assume the conversion would be the same? So you can let Encore do it without sacrificing anything?

Cheers, keep up the great work!

John

Awesome tutorial! You explain things very clearly and make it very easy to follow!


Thanks!

Man, i can't wait until the 100th tutorial... hopefully its good as always

hahah great ending, gotta love the "short circuit" reference

wow!! Amazing as always.

I'm From México and almost i'm gonna have my degree in Comunication (Video, Audio, Desing and a lot of stuffs) and always get inspired by this page and of course for you.

Thanx a lot for give us this information and tutorials. I have a lot of question about Posproduction and i hope to have help in the future with more tutorials. Congratulation for this awesome page and the big talent you have.

Very good! Congratulations from Brazil!
His talent came here!
Muito bom! Parabéns do Brasil!
Seu talento chegou aqui!

i need tutorial video

i need tutorial video

hi my best teacher
i'm sami from yemen but i live in saudi arabia
i like your tutorials so much and i thank you alot my dear
you made me good at man in after effects

i hope to be like you but my broblem in English i'm not well
but it's ok i can understand you lettelbet

thank you. it was really useful!

Short Circuit is a classic. I think I did pick it up in the cheapo bin.

some people want to be like Michael Jackson or Michael jordan (with all respect) :P:P I WANT TO BE LIKE Andrew Kramer

Quick Question... not exactly sure what the issue is but when I choose new menu in encore, it automatically is putting a premade template menu in, not a blank menu. any thoughts???

Hey Andrew,

Awesome tutorial as always!! I had a few questions for you that you may or may not have the answers for on here.

1. Is it possible to make the buttons movie clips? How would you go about that?

2. Is there a workaround for making multiple angled video in After Effects or Encore CS3?

Thanks man, keep up the great work!!

Andrew, I'm from Iran, you are amazing, many of video editors here use your products and i use them too. i learned After effects from you and think you are the only teacher available in internet for free. do you have any other video tutorials? like Photo shop tutorials or other software?
i love the way you teach, you say everything like shortcuts or you tell us the reason for anything you do.
thanks a lot for helping me a lot. anyway please write a short story of your life and how you became a video editor and how you learned so many things. that would be really really helpful.

Mr. Kramer, you are one of the reasons I am aspiring to be a film maker today! These tutorials are amazing. Thank you so much for the great products and the absolutely awesome Tutorials!

sorry that thisw is my first time responding out loud... but really,Thanks again A-man

Great Tutorial , but I´ve 6.5 and I couldn´t fix de loop point in Encore. Is this OK?

Andrew is smart.Maltaannon is genius.John Dickinson is clever. I wonder what these three geeks would have made if blended together...let's say...multiply mode...or classic color burn!!haha greetings from Eritrea U'r the man Andrew!!!

so cool.
This is a great tutorial.
hey andrew.we are team from morocco.colled CHIDORI TEAM.
watch our presentation:
http://www.dailymotion.com/relevance/search/chidori team/video/x94ws4_chidori-team-one-year-later_creation

You have a beautiful wife, thanks for this tutorial.

Hello, im a Film maker student from Argentina and i just wanna say thank you. Your site really help me (and to others friends) to understand how to make our firts movies and stuff. Im sorry for my bad english (I learn from subtitles movies). I promess put you in the credits... keep like this, and thank you again, really...

Simon

Like the new skin!

Andrew spelled association wrong in the tutorial haha!

great! When you are done releasing action essentials 2, can you make a tutorial on making a high quality human torch? every tutorial i find ends up with the fire looking unrealistic...

youre great dude...
greatings from Philippines...
(oO,),\m/

Thank you Andrew! That tut really helped me out for a DVD Menu i wanted to create! Ur awesome! Cant wait for new tuts!

Greetings from Greece!

NICE TUT!

Thaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaanks.
It's realy coooooooooooooooooooooooooooooooooooool.

Johnny 5
Man....That was a HQ movie....think they even made a follow up...anyway.

Great tut Andrew, you are wise beyond your ears? or was it years.

you are a God sent!

Very nice Andrew!

My name Alexey Koenig. I'm from Russia.
Can i ask you a question?
What camera do you use?
Could you please write me model of the camera?
Thanks!!!

hi
please password zip file tutorial after effect

We're not worthy!!
We're not worthy!!

thanks Andrew

Awesome tut AK,

Is it possible to go into more depth with buttons?

Like make the text highlight a different colour or using an icon as a button?

Thanks for your hard work!!

Ricky

i've never commented on any of ur tutorials, so first: i wanna say thank u soooo mush 4 this tutorial. iv been wanting to learn about encore 4so long

WOW. this is really useful it has helped me so much, keep making these great tutorials!

Thanks!

I have had issues in the past with encore burning blurays and the bad error reporting encore does, the one thing i have found helps is to get rid of spaces in the project folders, and any filenames, a pain but worked for me.
Oli

hi andrew,
can i ask you a question?

what is the font in the mpaa scene?

This is great.

Im having a problem with the mpeg2-DVD an error pops up that sais smt about the writer please help me ANDREW AND REPLY TO MY EMAIL p.papaspyrou@yahoo.com thanks

what i has watched seem to be simple,but how to do is very hard.thanks for all the tutorials..

Hi everyone ,i'm from italy,
i have a huge problem at the last when i make the dvd burn.. encore show me this error:

"ERROR PGC, line 0.."
just 2 second before the end of timeline..

how can i fix it?

thank you.

You're like Michael Jordan man. Everyone knows that every game you'll take the game-winning shot, but still makes it anyway. Damn. LOL

But what was that at the end? It just stops at the photoshop part. I didn't get to see the what you did next.

But it still is a great tutorial. I hope you fix the tutorial video. Thanks and keep it up!

Hey i just watched the DVD Authoring tutorial and i was wondering how to make a chapter selection button and menu...so when you go to this menu you can select specific chapters in the feature presentation just like in a real movie DVD. Any help would be nice

so cool. this could be a sweet film

Dude! Thanks a million for this tutorial. This tutorial is crazy good! I needed it so bad! I'll have to see it a few more times. It was just too much info for one view. I loved it! Thanks!

this is mad cool

A great follow up to this would be a tutorial based on building a movie trailer for a summer blockbuster. I think it would help to re-enforce some prior tutorials in title effects, sound design, prepping footage, etc, etc...

Plus it would give everyone a chance to learn more about making the 3 mins short films that gets our 12 dollars every summer.

Great work as always, keeps me buying the DVDs.

Woo! I only wish this tutorial had come two months ago when I spent a week trying to get worthwhile motion menus.
But anyway, I'm happy that I can do it now! Thank you so much!

Hola.. Hi, How are you Andrew?

Thanks for all yours tutorials, they are the best, really, I learn so much with you.

I hope some day you will take a few moments for do it one good tutorial, it's about "THE BUTTERFLY EFFECTS" when Evan Treborn (Ashton Kutcher) look the book that he right and star to remember and the letter of the book beguns to moving... one tutorial like that will be espectacular..
Sorry for my poor english, I hope that you understand my idea..
Thanks again man!
Saludos from Uruguay.

Brilliant Tutorial man. i love it.
-Richard.

great tutorial Andrew!!!
But how I make chapter menus in this way??
With the boxes playing a preview of it???

Thanks

Love Andrew Kramer's tutorials and even though this is not the point of this tutorial, have to point out the distance of the punch from the face :D hehe

Great tutorial mate!!!

Hey Andrew, nice tutorial!
But one question. Ok, for the buttons, I don't have photoshop, and I really want to finish my DVD, but I can't make the buttons. Is there a way to make buttons without photoshop? Please someone help.

finaly one of these tuts...absolutly amazing!!

Sos un genio, muchas gracias Andrew!

Nice work Andrew, keep it up.
you are great. Thanks a lot from me and my friends in Pakistan.
You are great...

Thanks again for another wonderful Tutorial! I have been working with Adobe Encore for about 2 years now and you have just made my job soooo much easier!

Andrew, You will always be my RECON MAN! LOL!

Nice Tutorial Andrew, you the man...

by the way, can you do one with lets say a map or globe with a red line moving on it like a track to show lets say a trip from one place to another, or even with a plane...

just like in Indiana Jones movies...

thanks again

Andrew is that a movie you made?

Thank you for all the tutorials..
I learned so many things from you...
Really awesome.....

hey Andrew !
that's a very nice tutorial,you're a cool teacher !!
Please can you make a tutorial for making a 3D football ?
because i would like to do a clip with football tricks and i don't now how to do that exactly, I tried it out with "cc sphere" but it's not looking really good, so maybe you have an idea .

Nice Work, Thank You Andrew

this is awesome i have been wanting you to do a tutorial like this forever, thanks andrew

Dude I hate you, you make everything look so easy. I've been fighting DVD authoring for a long time. GRRRRr you should of had this up a long time ago!!!!

Thanks for all the tutorials and help. Pro Scores is AWESOME!!! Love it!! Keep up the great work!

I have one question...in AAE i don`t have the mpg2 format to render..how can i do so i can render it in mpg2 format?

awesome dude...i really like it although it's quite tough for me as a beginner..however, can i use different authorng software let say: after effects and ulead video studio? thanks!!

very cool man ...

Promotional Picture Assoction of America - LOL

wow! really cool stuff as usual. andrew you are a legend. now, please make an advance tutorial on encore for the experts using production premium thank you for all.

Andrew, you are a freaking LEGEND!!! Thanks a lot!!!
Now I can start making DVD'S!!!! THANKS!!!

I've been using Encore since it first came out, but it wasn't until this tutorial that I learned about looping the menu at a determined point. I have always put my first-play video on a separate menu. It's end action is set for another menu that has the buttons. Glad I watched this :)

awsome tutorial andrew, thanks form colombia

omg, thankyou for this tutorial.

I spent an entire day learning how to author a DVD, and this cleared up some loose ends. Thankyou.

Hey Guys, I always found it a coincident that my name is Sam, and Andrew is always using his buddy Sam... but my full name is Sameer.... Now there's bought! WHOA! Love this tutorial like I do with all the rest.

I used to be .. barely an amatuer at After Effects... but his tutorials have made me so comfortable with the program! I've started doing my own things now, but I still come back here to learn new things. No he has not paid me to say this, this is probably the BEST tutorials.. period. Fun to watch, never lost! THE BEST! THANK YOU ANDREW KRAMER AND ALL AT VIDEOCOPILOT

very good!

Thx Andrew you worked pretty fast at the beginning but u explained everything so well the speed was fine. OMG I think I saw u for the first time, I didnt think u would be a blondiee! (:

hey nice tutorial can't wait to try it out myself good work!, and sam looks like he enjoyed that too i meen come on look at his face on the menu phenominal.

tx very cooool

as i expected :)

Amazing tut. love it, helped me out a bunch

I'm still having an issue with the text being stretched, can anyone shed some light on how to fix this problem?

Thank you for this great idea!!

Nice work!!!! i am Brazilian and my english is bad.
why you dont make a subtitle??????

Wow! Timely tutorial, I was just about to make a show-reel of my works on DVD.

a brilliant tutorial. is there any chance of downloading this tutorial to my harddrive because there is no project to download?

cu
allan

wonderfull tutorial ! thank you so much for these
free lessons !
i'm only thinking about the possibilty to use this technic for some professional presentations !
by creating dynamic links we can master the presentation as we can do in flash with action script is it possible ?

Great tutorial. And great timing for me because I am looking to enhance our weekly church DVDs. Now I just have to figure out how to use these features in DVD Architect. This might push me into using Encore.

Wow - these comments are pro. U R all so gud @ wrds.

Thanks for another great tut Andrew. :) Hard to find good applicational principals that also look sexy.

i see ur all tutorials in your website , but can you give me your mail plz because i want trapcode foam

Great tutorial! Helped me a lot! Thanks!

Hello. I cannot get Adobe Encore. It wont work on my computer for some weird reason. Is there any other way to do this?

I tried with some other free programs, but they suck. :/

I have Flash CS3, if that would help to.

Congratulations, as this tutorial, you know it! An embrace of the galera Brazil ..

I've been wondering what has taken you so long for your next tutorial and this one blows my socks off!

so good .

Great video, very helpful. Makes me appreciate encore more, all that end stuff is too much work...I know, not really. I think maybe you should put together a series of straight up, theory type stuff. You know, an hour with "cool" expressions that have really helped you. I'd buy it.

This tutorial saved my life, early this morning I had to author a DVD, I had never used custom buttons and titles before, this tutorial was clear enough to help me through encore and the creation process even though I had been away for almost 36 hours straight. Good job!

Awesome work. I've owned After Effects CS3 for a year now and have been intimated to use it. In the last few days I've had time to finally give it a go. Now I've come across your videos and I can't wait to try new things. Thank you!

Awsome man awsome!

Excellent. Been looking for this information for a while. Nice on Andrew and the team!

Hey Mr Kramer! Just watched your DVD-Authoring tutorial and all I can say it's awesome!
Thanks you so much!
Greeting, Rutger

dvd authoring is cool. could you give us some tips on v-ray render

perfect
thank you

Hey Andrew,

Great tutorial, but I have a question. Why is it when I follow the tutorial and I change the standard from square pixels to the 1.21 my pixels get all fuzzy and when I bring it into Encore, it never fixes. I'm trying to make a Wedding DVD, but no matter what I am getting that weird antialias thing going on with the pixels.

Any thoughts?

this is the kind of tutorials was wating for.

Big big thanks from Portugal Andrew.

Seus videos são fantasticos!!!=your videos are fantastic!!!

hey andrew love all your work and your tutorials there great and easy to follow

any one else see your name in the credits for Star Trek. what did you do in the film

thans for all your help keep up the good work

John

Could have used this last week with a deadline hurtling at me, but it'll definitely get used in the future. Thanks very much for all your work. -R

Hi Andrew,

this was a great tutorial. thanks a lot.

Nice Tutorial man. I think its realy cool to get in other application, then After Effects, because they belong to filmmakng like...xD
NICE

Hi Andrew,

I am a huge fan of your work and tutorials on both creative cow and video pilot. Unfortunately, this one didn't work on my PC. I tried several attempts to view full tutorials but video stops after good initial 2 minutes from start.

Excellent tutorial! Thank you for always making difficult tasks easy.

this is nice

Very very nice. ADOREI VC E O MELHOR DOS MELHORES
INCRIVEL DEUS TE ABENÇOE. GOD BLESS YOU!

VENHA AO BRASIL EM ESPECIAL BELEM DO PARA

I wonder how the Johnny 5 story was going to end :)

SAUSAGES!!!!!!!!!!!!!!!!!!!!!!! Nice tutorial AK, give me a mention in the next one please, that'd be sooo funny cheers mate.

Awesome, this was extremely helpful. As you said, DVD authoring was something I knew NOTHING about.

Nice tutorial as always Andrew, thanks alot :)

Nice tutorial as always Andrew, thanks alot :)

Thanks man I've been waiting for you to make a tutorial on this for a long time!!! :D

What is your computer specification????Tnx!!

Thanks i have been wondering how to do that for ages it will really be usefull to me.Thanks

James

trop cool man, vraiment je m'amuse à d'enf avec tes tutos, je suis ingenieur informaticien (formateur dans une société algérienne 'Sonatrach') et je compte ajouter une formation After Effects CS4

* very cool man, realy I'm happy whith yor tutorials, I'm Ingenieur(Teatcher in Sonatrach "algerian siciety") and I want pout à new formation for After Effects CS4.
thanks for yor good job.

you're amazing man, I love your jokes! awesome tutorial.

Thenks for all these great tutorials...
Now my DVDs look very professionell.
You are a big help.
Thanks,
Lauritz

Wow! Thank you once again.

very good Andrew

i want sample project or sample mov plese

This tutorial was really great. Encore was a bit much when I tried to use it for the first time. Maybe you could do more Dvd tutorials such as advanced transitions between menus, and other things that people may find useful.

Thank you so much for making this. This has been on my wish list for so long.

That's Great man ... Thank you very much very usefull, helpfull and clear ...

Thank you and Congrats from Brazil ...

waw that so amazing .thks men .wonderfulllllll

Hey Andrew, Thanks For Your Tuts...You Are The Best.I'm Not Saying This Because Of Your Free Tuts...I'm Saying For Your Creativity...Which Can Be Understood By Your voice...You Are The One..God Bless You.

Thanks
Regarding
Faisal Amin
Chittagong, Bangladesh.

awesome job

Very cool! thanks a was watching this very tutorial in my computer the other day...in my brain

Thnk you very match for your tutorials for after effects , Ples nother tutorials in 3Ds max ,thanks thanks

hi andrew
this is ajith..can u teach me how to render in high quality with low file size...thank u
ur big fan ajith(kerala..india)

hai my dear friend,

This is very nice tutorial,comparing to other tutorial its very simple.Me a regular watcher of your toturial.so keep going.God will bless you.

RIN JACOB.T [INDIA.KERALA]

excellent man!
this is the exactly tutorial I was waiting
Greetings from Mexico

De verdad que te agradezco , este tutorial es demasiado necesario! te felicito me enseñastes algo increible que no sabia hacer!

Muchas gracias Andrew kramer!
vcp rules! xD

I want to thank you AK for this tutorial. I have made a great DVD of my son and another for a friend of his family at Easter. Although I have used I DVD, I like this process much more. I will continue to improve my menus and document the lives of my children on DVD, Thanks to you! I hope all is well in your world.

man that what i need

coOol !@!

Great tutorial andrew....you r the best...
Thanks

Greetings from Libya

Andrew, you rock.

But, why are you teaching us old skool tech like DVD authoring? LOL Just kidding... I have a feeling standard def DVD's will be around a lot longer than most people predict.

I remember when I was a kid, I thought people would be traveling around in hover cars by the year 2000! (thanks a lot for the let down, George Lucas) Instead, we are still traveling around on rubber tires that were first used over 100 years ago! So, don't count SD DVD's out anytime soon.

Great!

but now i still don't know how to make a scene selection :(...

he is really nice.. i love his tutorials...

thankss..!!

Why i can't watch the tutorials?
Is it because i in china?

Hey Andrew, awesome tutorial. I'm sure it cleared up and questions about DVD authoring that people (including myself ;P) might've had. But I have a question, instead rendering the menu out as a video in AE, why don't you just open the project in Encore? Wouldn't it be lossless quality this way? That way Encore doesn't have to butcher the quality of an already quality-butchered video.

Man I which I had seen this earlier. I had to learn the hard way through hours of research/trial and error.
Great tutorial though.

i enjoy this ....one of the best time spend on pc

man!!!!!!!!!!
this is soooo helpful. thanks a lot ... :)

Very helpful. Thank you.

Andrew,

Always enjoy your tutorials....

Just wanted to chime in on the set location for Recon Man IV... I'm pretty sure that's in the basement / parking garage of where I work. Do you work here in this building as well?!

you're the one man! thx

Very good tutorial, but I think you lost it at one point.
When you render a motion menu you must make sure that you do it in a intra-frame video (DV, Uncompressed, Quicktime, anything else) and NOT MPEG, except if you have the option to choose where to manually place I-frames. The reason for this is that in an MPEG2 video like the one you rendered out here, not all frames exist in all the video (MPEG2 standard GOP). In order to have the video loop at the EXACT frame, by DVD spec, you need to make sure this is an I-frame. The way you did it doesn't ensure that and it can work only by chance. The loop point will be somewhere there but not at the EXACT frame you want it.
So you are better exporting in AVI (or Quicktime) and letting Encore do the MPEG, so it can place an I-frame where it is supposed to be placed,in order for the loop to work as desired.

Thank you again though for the AWESOME tutorials and the major break you have done in the Motion Design industry...

thank you so much =*

Andrew the man....your my idol.....i hope u can visit philipppines...ur such a good visual artist and motion graphics. i hope that u can made the whole world known of your works...thanks

You are EXCEPTIONAL MR "Cramm'er",
Both for the the most outstanding "real life" tutorials you present and your "mind-reading" skills of our needs.
Congratulations!!!
Many Fans over here..

Damn! thats what I needed like 2 days ago! well anyway this will help me out in the future for sure!

another exciting tutorial

thank u sir iam lern more from u r tutorials

WUUUUAAAAAAUUU!! Andrew you're the best in the word !!!

Great tutorial as always AK - for those of you who might want some further inspiration for your dvd menus, check out http://www.promoscape.com.au/ - cheers

Hey thanks for the great tutorials, I have a question a bit off topic maybe,,
What do you use to record your screen when making the tutorials?
I'm interested in making some for Pro Tools.

Great, very useful info

Hi Andrew
It seems that your rings tutorial made good for the tomatos :)
http://www.houwelings.com/
Amazing they grow 428 ton of tomato per akr

thx thats was gr8 tut Andrew

can u tell me from where i can get that Action sounds like kick . or punch or that kinda stuff thx

Thank you Andrew for your kindniss sharing your knowledg with the World.
But I've a problem with this Tutorial!
It dosnt open! when I click on the "Watch" button, comes an empty window!
please to fix it, many thanks again.

best Regards
Huner

Can Encore do a 2:1 anamorphic aspect ratio? What settings would a person use to do that?

I've always wanted to learn it! :D Thanks so much.

p.s.
"Yes, that's the face we're looking for!" poor Sam xDD

Nice man! Can you make a vector title tutorial in the future? That's the only thing I miss in your big, awesome tutorial collection :D

I cant get the mpeg2 dvd option on the render settings.

thanks Andrew you're a real artist, waiting for more advanced tutoriels

Anyone ever have any problems duplicating Encore DVD's? Or answers for how to fix that problem for that matter?

well thats nice and unique andrew

your free tutorials are more interesting than your products

well just kidding...
keep Rocking

Andrew honestly That tutorial was a bomb.
Keep up great job!

Congratulations!!
Greetings from Turkey,

"Watch Later" - Classic

I've got to put that on my next DVD :)

Thank you andrew, that was so good.

I don't know so much about after effects, but sometimes I check your tutorials and i enjoy!

HI my name is hasan my country is Turkey this tutorial beatiful thanks Andrew :D

ur to great

coll...))) i like xD CS !!!

Man you just dont know how many pepole around the world you just helped!!! freaken sweet!!!

You are so talented.
Keep it up plz.

Hey! You are the incredible son of a wich!
Your genetical magic touch work on so much software. As a new cs4 suite user, you are a gift of seven heaven...

Thank's for your numerous advices.

Esselente Papá.....

I have waited to find something like this for an absolute age! Another fantastic tutorial! Thanks

good work andrew, as always!

Wow, another awsome tutorial. I don't know how you do it but keep it up! I'm always awaiting impatiently for the next tutorial.
Thanks Andrew!!

How do I get my video to render to the .m2v standard? When I select Mpeg-DVD from the drop down in the output module, and follow AK's settings to the letter from the tutorial, my file is .mpg. I don't get it. The only way I get .m2v is if I use the Mpeg-Bluray option. Is this common, or am I over looking something?

Dam Sam is so hot!!!!!! Men your the best... ehm.. you too Andrew thanks for de tut

Very nice.
I had to make a DVD menu for a spoof on Wizard of OZ in high school. It took forever to figure everything out. Wish i had seen this tutorial before I spent tons of time figuring it all out. NICE JOB!!

GOGOGOGO 100 FREE TUTORIALS!!

Yu are amazing..I love you..I have been looking to do motion menus..maaaaaaaaaaan.As usual yu are a constant pro.God bless yu...and I will spread e name A N D R E W K R A M E R!!!!

Thank you so much for this tutorial and all of the previous tutorials and realy you are my best teacher thank you again

Very very nice Tutorial :)

keep it up.

glad somebody finally referenced short circuit...

again and again.. it's a great tutorial for me that I am looking for many times.. the looping key.. I didn't know that. thank you Andrew..

Man, Sam is looking sharp!

Good subject, good tutorials. Thanks

GREAT TUTORIAL MR. KRAMER! THANK YOU! THIS IS PERFECT TIMING!! YOUR A PRO! KEEP UP THE GOOD WORKS!

Thank you, thank you, thank you!
I've been looking to do motion menus for years and have never known how until now!

Always great, and I may have just missed it, but is there a way to set exactly when the button becomes available? If I have text that flies onto the screen I wouldn't want the button that would be at the text's resting place to be clickable until the text has landed. Thanks!

nice :D

Just in time really! Thanks a lot Man :)
greetings from Egypt.

God... every one now in the world know who is Andrew Kramer!!!

Excellent tutorial Andrew! Finally a useful DVD authoring tutorial for Encore by a reputable artist! I loved it! Thank you, Keep them coming!

Great tutorial, very helpful.
Waiting for Action Essential 2.

Thank you!
From: Brazil.

enjoyed it , thanks Andrew Kramer

Good job but very simple! hey Andrew we still waiting for your new professional one and you are still my master !

love'd it!

wow nindota bai...

from philippines

nice tutorial!!!!!
but I have a question are you now how can made SCENE SELECTIONS to DVD menu you now with the little videos
thanks ....
Im sorry for my English is not very good
but I love you tutorials and you teach me to understand English you're the best teacher I have
thanks MR.ANDREW KRAMER
I hope you can answer my question

thanks for great tut..

That movie does Rock!!!
AND JOHNNY 5 IS STILL ALIVE!

You should really make movie

I have a dumb question. When you dropped comp1 into comp2 with a DV Widescreen you mention that it stretched the text. Why did you choose to make it in one format(1.00 pixel aspect) and then dump into another format(1.21 pixel aspect) when it pixelates the text? What are the issues with making the first comp in the DV Widescreen format (1.21)? I am asking because my text always pixelates when I send to DVD. Thanks!

Excellent, Andrew. Thank you very much.

I am an After Effects guru. But I am not as good as you and never will be. These tutorials have helped me. Never stop making tutorials. I wish I could be as good as you and I'm only 12...

:D Keep it up!

hi,
i'm from iran, tehran
this comment is very exiting
can yuo help my abute more way for creatin authurun dvd.
thanks again

nice tut...I'am Mongolia.Asia...Do you know Chinggis Khan..I'am here :)

Andrew - awesome tutorial.

However it's 2009...can we get a Blu-Ray tutorial?

It's awesome to see you use Vista 64-bit and when you preview a DVD in Encore you get the same flickering at the bottom of the video preview window that I always get in Adobe Encore - one of the few problems that software still hasn't fixed in CS3 - CS4.

Andrew
you are so Great~!!!!
i'm in korea rainning today~

Thanks for this excellent tutorial Andrew!!

Lol.. what happend at the end of the tutorial??



Greetings. CC³.

Can Encore only do 16:9 and 4:3 pixel aspect ratios? What if you wanted to do a 2:1 ratio?

excelent

always the amazing stuff.

thanks again AK...

you are the best!

Jonny 5 is alive!!

Hi Andrew, first of great tutorial, but if encountered a problem this keeps poping up : After Effects error: Writer Initialization Error (0 :: 9995)
Any idea how to solve it? I've done every thing just right (triple checked). Tanks

WOW... awsome, i already work on the broadcast stuff but MAN i was jumping some steps so this tutorial saves me live.
Thanks realy nice work!!!!

nice one ... Awesome Sam =_=

Really great tutorial! I've been looking forward to this specific one.

It would be really great if you could go a little more in depth with the buttons though. And it would also be great if you could show us how to make different out-animations, depending on the button you click.

Thank you so much! incredible tutorials, keep it going : ) //Philip Shield

Great tutorial! Incredibly useful!

Very nice, but wonder why you didn't use the flowchart. I think it's easier to understand.

Nice Tut - Strange Ending

Love the tutorial as I have been shying away from ENCORE and sticking with a simpler athouring program. I'm going to make the jump. As for the ending people... that was called an outtake and I'm sure it was left there on purpose ala "Home Improvement" as well as many movies. I was actually looking for this and Andrew didn't disappoint. Love the jokes, love the ramble and love to see Sam in your tutorials. Lastly, you and your wife make a lovely couple. Beautiful menu of you too.

Take Care,
Steve

Yes, I'm glad all that you do, everyday I am logged on your site, I do not understand all the teams show Videocopilot a blessing from God, but I'd like to offer so much if you let me. So God bless you

uh, hey, very nice. Im thinking of doing this for my short DVD i am making. how much does encore cost?

I like when people comment here and ask him direct questions.
When was the last time you saw him even post one word here?

Check out the forums.

Oh and I'll be like everybody else:

Ohhh Mr. Andrew Kramer! You are like the greatest....wait...you ARE GOD!!
Will you be the godfather to the children I have named after you? Please!

Yea it's a great site with good tutorial's (not tute's). Ease up a little.

wait, you forgot to show us how to get the O target like!

TOTALLY OUTSTANDING !!!

AWWWSOME! Keep it up man!

Thnks

Wery usefull tutorial, thx.

I found this stuff.

http://www.pseudoart.co.uk/portfolio/type/dvd_authoring.php

Some cool inspirative menus, also made with AE and Encore. And the menu preview in flash rulez.

hay andrew you should hav a dvd authering spot like you do 3ds max. pleeeees ceep making these.

hay andrew how mutch is adobe encore cus i realy need it for my new movie

Great tutorial. Always nice to learn some about the other apps in CS4.

i promise i'll buy your DVD's when i'll have money!

Another super and very helpfull tutorial!

God bless you!

Gretting from Roamania if you've heard of it;))

Nice one Bro, keep up the great work!

I just want to say that most of the things I know about after effects I´ve learned because of Andrew.
You are my idol and my inspiration.
My work is well respected here in Croatia.
I started when you published videocopilot.net in 2005.
It was fun this past years.
I sincerely hope that you will keep up the good work!!
Truly your´s Hrvoje Kova?evi?
Web design, video production and software manager

Amazing work...

Thats the face you where looking for? jajaja

Another great tutorial. This was EXTREMELY helpful. Thank you so much.

Nice tut, thought I could have wished for som transitions between the the menu and the actual movie.. Hope it comes...

Thanks!

Thank you so much i've been waiting for this!

Great tutorial, really helpful

*****************
www.JBS-Productions.com

classsssssssssssss, just got twitch and sound fx :D woo, ace tutorial, this'll go nice with my film animation :]!

LOVE THE WORK from the UK

Excelente video tutorail Andrew!

Excellent tutorial Andrew!

Nice tut Mr Kramer! I was waiting for this for a long time now !

by the way your wife is totally gorgeous !

cool but actually u can do this thing with other programs...

:|

i prefer special FXs tutorials..

This is going to be very useful. Big thanks!

Greetings from Finland

Andrew,
Thanks for another great tutorial. I don't have ENCORE yet, but after seeing your tutorial, I'm getting it. ADOBE should have you do all of their tutorials for ENCORE. You make it so easy to understand and navigate.

Anyway, great tutorial. I am definitely going to use these tips on my next DVD project. I loved the action shot and the freeze-frame notes.

Nice, I've waited a long time for this :D

Thanks man.

Hey! I like SHORT CIRCUIT...punk!

Fabuloso tutorial..! Gracias Andrew..! :)

Very nice. looks great

nice tut man.

GJ

Guys you're the only professional training tools really for free. I have never seen anything like you. Love your website, your manuals and your sense of humour. You are simply lightyears ahead of anything else I have seen. I deffinitelly buy your products.
Thank you.

Great one, very useful tut.
best regards

sweet! this will be really useful!

Great tutorial :)

Very useful tutorial, thank you for sharing those awesome tutorials!

Thanks Andrew exellent tutorial :)

awesome tutorial andrew!

Thanks again Mr. Kramer,
Btw. how's your Joke writer? He's good :)

Andrew...you are the bomb once again. Great tips!

Lol I wanted to hear what you had to say about Johnny 5.

Yeah i done many a tutorial and i must say you are the most interesting to listen to. Most other tutorials i am struggling to stay awake but yours hve life in them. Sweets bro

Wow, new post, I love it!

Another Tutorial Andrew, Keep up the good work.

If you want to see a more in depth training video regarding DVD authoring then buy Serious Effects and Compositing from Andrew, It contains all the infomation you require such as motion transitions etc..

awesome andrew! really nice.

Great tutorial AK. I have a ton of encore to be dealing with for rendering my trip to Thailand last winter. One thing I think is also handy to look at, is the "Flowchat" tab. Just nice to have a little snapshot of the route the DVD will take when you click on certain parts.

Dan

Honestly, how scared are you of your fanbois? People here seem so fanatical about you :)

Nice tutorial as always, keep 'em coming.

Hey!

Yet another fantastic tutorial! But what's with the cheeky gits complaining about what they would've rather you did? Yeah, yeah constructive criticism is all good, but if you're getting a thing for free? The whole point is to give us noobs (or not so noobs) a clue about how to use the software in simple terms. Then it's up to us to experiment and be creative with how we use it! I'm putting together a video for a top secret mission and your tutorials and products have made the creative process no harder than sifting through my own imagination! God bless you all at Videocopilot. You rock!

Great tute, amazingly its an answer to recently published post on ur forum!! Love the animation and i think its time to get encore!!

GLenno (Perth, Aus)

Thats realy cool!!! I like the compination AE En
Best greatings from germany!

Amazing tutorial I can't tell you how much i needed this. Though Andrew I have some constructive critism for you. As a martial arts expert and a person who directs action and martial arts films I have to say that punch is a complete miss. I know your a visual effects artist and not a fight choreographer so i forgive you :D. but for anyone else out there think about your use of angles when you shoot, one miss in a fight scene will make the whole film loss credability.

I was wondering what the Picture ASSOCTION might be ;)

U r awesome

Thanks for this Andrew.

I've really been hoping for a tutorial for Encore, and one from you, well, thats just to be good to be true, but now it is!

Greetings and respect!

www.vex.se

very great tutrial

great as always

man can't wait ur tutorials

again nice one keep it up
From Mongolia

Damn mate, even if your tutorials were not that great, I would still watch them for your jokes xD You're just killing me with those, keep 'em comin'

You guys...the end of the clip was just some footage of his tutorial that he meant to edit out, but in the process of editing, forgot to remove it. These tutorials are supposed to be teaching potential movie makers and effects artists, and you guys don't figure that out? Lol.

Awesome tutorial Andrew. Please don't ever stop making more.

Great tutorial, this is what i was looking for, for many years.

your tutorials are rocking in Sri lankan TV channels..

Keep it up :)

Waw Coooool

Great Tutorial! Thank you

great tutorial a bit of randomness at the start i love it when people do that

man you have no idea how mutch that helped me. i've bin looking for authering sotware for like five monthes, so andrew you're the man.


you should make a nuther authering tutorial.

Really Really Really great tutorial
very nice Andrew
please keep it comes man

Agian Great Tutorial!
I love your creative ideas!

Hi Mr Andrew You are Realy King of the AE

Sounds good not bad

that was soooooo cool!

Good as usual.

Thanks Mr. Kramer,

That was very helpful. Keep up the great work.

Andrew, you have a tutorial like this in one of your products. Serious Effects

Hey Andrew,

Do you need photoshop to make the buttons? Because I am right in the middle of making a DVD and I have Encore but I don't have photoshop, so is there any other way I can make the buttons? Could you just import a solid from AE?

Cheers.

Thanks! Man Good tutorial!!

I know i shouldn't but i am staying up to 4 oclock in the morning watching this! THAMNKS ANDREW KRAMEER

Always thanx AK!
Here's another very exciting tutorial!
"? ?? ???!"
That means you are the best in Koean.
Sincerely yous.

from. South Korea

You are God sent.... thank you dude.. you and Lam Soya... I mean, Sam Loya and the rest of the Video Copilot team... I was actually working on a wedding video that I'm doing for my boss and I hadn't even begun to think about exporting it for DVD and you sir have already helped me out...

Okay I'm lying I did think about exporting it for DVD and to tell the truth I didn't wanna worry about it just yet cause I thought it might give me a hassle... but like I said... you sir are God sent...

Thanks a mil... thanks a millimeter...
Thanks a million...

I love your site...you are doing great stuff.I strongly recommend yout tutorials...thx for sharing your experiences with us.. !!!

Andrew; you´re the Babe Ruth of After Effects.

hey Andrew is that AE CS4? can we do this in CS3?

Keep them comin! nice vid

Love it when you put a story in your tutorials it makes things more intrersting and fun.

Awesome, man!

Just one question:

Andrew, can I do some button animation with sound fx in this dvd menu? In AE or in Encore?

It looked like the only options for aspect ratio in Encore were 4:3 and 16:9. What if you wanted to do a 2:1 aspect ratio?

oh ma god its damn awesome

Yes man. Very helpful. Tanks

Wow, never thought you would teach me about building dvd's. Then again, I never thought I would learn about them anyway! Leave it to you Andrew to make me a smarter person! Can't wait to blow my friends away with a cool movie using some of your tricks along with a cool intro to the dvd!

You da man now dawg.

I didn`t find the MPEG2-DVD format in the output module settings. Is it only in CS4? Wich should I choose in CS3?
Thanks

WOW!!!!!!!!!
3 TUTZ IN A SINGLE MONTH..... U JUST ROCK MAN
CAN'T WAIT TO WATCH IT
WD ALL D LOVE FROM INDIA....
KEEP ROCKIN COZ I JUST LIKE UR TUNE

Awesome! This is something I've really been wanting to learn. I was starting to wonder if you were ever going to update to CS4.. sweet beans.

I love watching these tutorials. Thank you Andrew, for helping guys like me learn so much.

Really good tutorial! I have just recently found your site from a friend and must say you make some great tutorials for free. Plus that software and stuff you offer looks great. I can't decide which of them to buy first as I won't have any money till next week.

Great tutorial, can't wait for Recon Man III to hit theaters!

Wow! Another New Masterpiece Mr. Kramer! Long live Mr. Kramer! More Power! and regards to the whole family of creativecow! God Bless!

Andrew I figure I owe you at least $5000 by now if not more, your a machine... Don't know what else to say...

dude, this is a SICK tutorial.

I have been WAITING for this!!!!! You rock!

Well, I actually don't use Encore, I use DVD Architect Studio 4.5, but the After Effects part was very useful to me :D

question
what if i want to make a chapter menu...
its going to be a still frame with selectable chapters(text)

can that still frame be a jpeg or it still has to be a Mpeg movie?

nice tutorial Andrew. thanx

Sweet. Thanks Andrew. This will be much help in the future.

Thanks, I've had Encore for 2 months now and have never used it.

Great tutorial man...you taught me almost everything. I needed a tutorial on how to make a DVD Menu like this, aww well too late. XD

I quite enjoyed Short Circuit also!

just what was needed. we can count on you. thanks

Yo, Andrew!
I have a question about Encore. I wanted to know how to make sure the button highlight goes to the next button after a movie is played.

Example: I've just finished watching the movie and it goes back to the main menu, but I want the "Bonus Features" button highlighted instead of the "Play Feature" button.

Also, how would I make the main menu stay on the loop, instead of starting from zero on the time line, after returning from another menu?

Example: I go to bonus features, but go back to the main menu, but the main menu video has started at the beginning instead of looping at the 2 second marker.

nice ME GUSTO MUCHOOOOOOOO se te agradece sigue asiiiiiii man saludos desde (PERU)

Recently working on my Demoreel n tried to dig out for making a proper DVD n finally blessed with this tutorial.....

Thanks U Captain Andrew.....

Lastly, I'm commited to buy 2 of ur product as soon as will get into a JOB...

Thanks Again

Thanks! Andrew Krammer the ninja! the best.

Great tutorial!!!! Your awesome!!

This is so funny because after about a year of trying to figure out how to author a DVD for my demo reel in After Effects and Encore, I just figured it out a few days ago on my own and low and behold here you come with your cool tutorial about it. AAARRRGH! Thanks, though.

Ah yes - "Short Circuit"! Ally Sheedy

Great tutorial. My only complaint is right when you were talking about bit rates in the export settings of after effects, it skips a section, the part where I assume you were talking about why you picked CBR at 6Mbps. I was dying to hear what a good bitrate for a DVD is and why?

Love your site and your products man, and any chance I get to tell colleagues in my industry about you, I do it. Keep up the great work

Yeah!! Finally!
I've been waiting for this, it's awesome Andrew!
Thanks, bye :)

wow! I don't have words to describe the wonderful of your tutorials! simple amazing! thank you very much from Panama

Great vid! Really Helpful!

Thank you so much!!! I am putting together an eagle scout ceremony video for a friend and he wants it tomorrow but i had no idea how to make a dvd menu so this is like the greatest thing ever. You have no idea how thankful i am right now.

Thanks for the continued education Andrew...you truly are the stuff legends are made out of. Can't wait to see what's in store next.

Muchas gracias Andrés, de verdad que me has ayudado enormidades.
Repito muchas, muchas gracias y que Dios bendiga siempre tu altruismo.

Tu amigo: William Cannavaro

This is AMAZING. I have been waiting for a tutorial on this forever!

I loved the end bloopers. This video really helped a lot!!!!!!

Great Tutorial! Thank you for the info on how to do awesome DVD menus! My DVD's will never be the same! Thank you Andrew!! Now if you can only tell me when can I purchase the Action Essential TWO I will be set for my great movie.

Geese. Take a vacation man! This is really gr8. Sweet beginning to FRINGE btw!

Hi,

great tutorial. As always.
But the joke with "Watch Later" :D
Nice. I knew it before happening.

Love your tutorials.
Best regards from germany

Another great video! I was just trying to do something similar and having all sorts of problems. Now I see where I was going wrong. Thanks!

How about 1 more with transitions? Like after you click a button we see what happens to Sam after the punch, or if we click the other button, something else happens.

Nice one brother!!

I love you Andrew kramer!

Awesome! I love how Sam misses the face punch! :D

Thxs for a DVD authoring tut this can be a very challenging thing to accomplish on your own with no previous experience.

Awesome tuts keep'em comin

woooooow anddrw nice nice nice

awesome tutorial!!!
thank you!

Looks Awesome!!!! Nice Work

Nice work

Nice Andrew however you forgot (probably it wasn't by chance) to mention the Motion between 2 menus. Yea, I know there wasn't any other menus in the tutorial but it could be.

Thanks for the tutorial though!

Hey Andrew,
Where did you get those punch sounds from, or how did you make them?
Also good tutorial!

What was going on at the end, it like cuts back to the middle of the video, only different and we never get to hear all of what you said. That said, awesome videos. Is that a clip from your next VCP product.

Felicidades esta super el tutorial, eres el mejor!!!

VERY NICE!!!!

Great, some basics but cool stuff...
Why dont you use de Flowchart for linking? its a great graphical way to see what will be happen on your dvd :)

and what was that on the end? don't get it...

anyway thanks for teaching Zen Master Kramer.

Finally I will start using my Encore software.Thanks Andrew and all the staff.

Another great tutvid! Keep it up Cramer, don't change anything..!

cooolll

Ha, ha, another great tutorial, Andrew. Plus I just got done reading Brave New World, love the reference!

Wow man, that tutorial looks awesome ..
You are the Man, no doubt =D
I love when you tell stories inside of tutorials ..
that is funny :)
greetings from Iceland and
keep up the good work mr. Kramer

Amazing...
thanks Andrew !

right on time for my birthday! Best birthday present ever! Thanks Andrew!!!

GREAT tutorial!!!
have been searching for a tutorial like this for a long time.. :)
thank you SO MUCH Andrew!!!!

What the hell was that at the end? :D

Great work as usual!!
Congrats

Yet, another exciting tutorial! Thanks Andrew! Your the best! ;)

Magnificent! just as always)

Haven't seen it yet... i love it already !

Awesome!

awesome tutorial!
Its great!

Wonderful tutorial...
....

thumbs up!!

awesome!

As a (now former) dvd studio pro-er, this tutorial has completely changed my mind about dvd authoring, and I can see many, many cool things to do using this method.

not a moment too soon!

Wow, this is SO EDUCATIONAL!

AK, you really are the best!

Thinking of things we don't know, putting them into a super tutorial and bringing them to us is ...

GENIUS

Nice nice but you know do it better

Maybe if the button was interactive with other action in video after do the click.

all the tutorial are amazing but this one is some simple.

Thank you and god bless you

Right on time

Awesome video, as always. You're a legend. Please keep making videos.
:)

Love it man!

Keep it up:)

peace

Nice work :)

thanks Andrew :D

Nice one!

Really great tutorial :)
thanks Andrew

Yeeah... it's looks nice))

I'm waiting for the tutorial)
Greetings from Russia

Looks Awesome!!!! Nice Work