E3D Only Loading first 9 objects in sequence

Everything Element 3D belongs here

E3D Only Loading first 9 objects in sequence

Postby RPSchmidt on 10/27/2017, 5:20 am

I have an OBJ sequence of 40 objects. They are numbered sequentially walk_loop01.obj through walk_loop040.obj.

For some reason, Element 3d is only loading the first 9 objects.

Is this because of the numbering? Because I can't remember previously having this issue, but it may be because my sequences were shorter than 01 through 09 in the past. I'm just not sure.

Any advice / help is appreciated. Thanks in advance!
RPSchmidt
 
Posts: 11
Joined: 09/23/2016, 10:37 am
System Specs: Dual Intel Xeon E5640 2.67ghz
48gb RAM
Dual Quadro K4000
Windows 7

Re: E3D Only Loading first 9 objects in sequence

Postby RPSchmidt on 10/27/2017, 5:29 am

Disregard... I just tested by changing the numbering of walk_loop010.obj through walk_loop019.obj and apparently the beginning zero is the issue. Anything over 09, it doesn't recognize as part of the sequence if it has a zero at the beginning of the three digit combination, apparently.
RPSchmidt
 
Posts: 11
Joined: 09/23/2016, 10:37 am
System Specs: Dual Intel Xeon E5640 2.67ghz
48gb RAM
Dual Quadro K4000
Windows 7


Return to Element 3D