Bevel Edge Expansion giving odd results

Compositing and Motion Graphics

Bevel Edge Expansion giving odd results

Postby KMac777 on 01/10/2018, 9:44 am

Hey Everyone,

I'm trying to expand out the bevel of some text, and the edges of letters like B and A are doing something a little odd. I've attached two snapshots to show what I mean. I'm pretty sure that Zaxwerks 3D invigerator has a way to fix this problem, but I'm not sure how to do it in Element 3D. Thanks in advance.

KPM

2.JPG


1.JPG
KMac777
 
Posts: 1
Joined: 01/10/2018, 9:40 am
System Specs: Good enough to run Element 3D

Re: Bevel Edge Expansion giving odd results

Postby JPT7505 on 01/10/2018, 9:56 pm

Try a different font
JPT7505
 
Posts: 779
Joined: 02/9/2011, 8:17 am

Re: Bevel Edge Expansion giving odd results

Postby stayhigh on 01/13/2018, 1:59 pm

There were two options that MIGHT help fix this issue - Fix Holes and Spike Filter. I'm not sure but its a start
stayhigh
 
Posts: 211
Joined: 12/15/2010, 6:36 am

Re: Bevel Edge Expansion giving odd results

Postby star+circle on 01/14/2018, 8:32 am

Advisable to make the font close to the final thickness before extruding. I use Illustrator for that, but other options exist.
star+circle
 
Posts: 731
Joined: 12/6/2014, 3:07 pm
Location: Finland


Return to After Effects